Style Wheel

Diferrent Styles For Different People

Home » Category: Outdoor Fun

Things To Know About Antifouling

It is very important to keep the boats and ships safe from fouling. The process required to overcome this issue is referred to as antifouling. They are very important to protect the boats. In order to protect the boat from fouling with the antifouling procedure, it is important to know a few things about the procedure.

1. Types of antifouling

Antifouling is of two basic types namely slipways and Marine Straddle Carrier or MSC. The Gold Coast marinas is the conventional mode of handling the process. It is used to haul out the boats while they are in the cradle. In order to perform this process, proper permission is required as it is assumed to be a hazardous process for the environment. On the other hand, MSC is considered as an environmentally friendly procedure. The boats are taken away from the water with the help of huge stretchable straps. For the required time the boat is rested on a large platform. It is possible to reach out for the bottom as well.

2. How it actually works?

The process checks the buildup of fouling due to specialized biocides that are part of the paint being used. Generally, it is copper that is the major component of the biocide. The time taken by the surface to wear away or degrade depends upon the kind of paint being used in the entire process. The antifoul becomes really active when the water clears the impurities on the surface the antifouling becomes active.

3. Application of the antifoul paint

There are two options for applying the propspeed application. Whether it is applied with the help of the roller or with the help of a spray. If you want to enjoy a consistent and uniform layer of paint over the surface then experts suggest using the spray. It is less time consuming and gives better results. It also reduces the friction factor that is reported in case of the roller painting.

4. Number of coats

According to the condition of the surface, the user can use either a single or a double coat. It depends upon the fact that how much thickness you want. Some antifouling experts wait till the first coat is done. If after drying it shows signs of wearing and damage then they advise to go for a second coat. In case the results of the first layer are satisfying there is no need to spend extra bucks on the second layer. 

These are just a few of the essential points to learn about the antifouling especially when you are taking your boat for the procedure for the first time.